Air King AD1308 Operations Instructions Page 1

Browse online or download Operations Instructions for Household fans Air King AD1308. Air King AD1308 Operating instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
SAVE THESE INSTRUCTIONS
1. Read all instructions before installing or using switch.
2. Use this unit only in the manner intended by the manufacturer. If you have questions,
contact the manufacturer.
3. Installation work and electrical wiring must be done by qualified person(s) in accordance
with all applicable codes and standards, including fire-related construction.
4. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other
hidden utilities.
5. This unit must be grounded.
www.airkinglimited.com
DH55 Rev. F 12-14 1 of 4
Dehumidistat
Model:
DH55
This device is intended to be used in conjunction with an Air King exhaust fan that clears the air of excessive moisture
as may occur after showering. This device CAN NOT reduce relative humidity below the level of the main living space.
NOTICE:
Electrical rating: Voltage- 120V AC
Full load: 7.5A
Using humidity range: 10% - 80% RH
Operating ambient temperature 10 – 40 ° C
INSTALLATION INSTRUCTIONS
CAUTION:
INSTALLATION BY A LICENSED ELECTRICIAN IS RECOMMENDED.
INSTALLATION AND USE OF THIS EQUIPMENT SHOULD BE IN ACCORDANCE WITH
PROVISIONS OF THE NATIONAL ELECTRICAL CODE, APPLICABLE LOCAL CODES AND
PERTINENT INDUSTRY STANDARDS.
CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE
STARTING INSTALLATION.
1. Unpack dehumidistat from the carton and confirm that all pieces are present. You should have:
1 - Switch Cover with Switch
1 - Switch Plate
1 - Knob
1 - Bag Containing:
2 - Gang Box Mounting Screws
1 - Instruction/Safety Sheet
NOTE: This unit is designed to fit over a single gang box.
2. Determine dehumidistat location. This control should be mounted on an inside wall where
normal air circulation can surround the control.
3. Remove cover from back plate.
Page view 0
1 2 3 4

Summary of Contents

Page 1 - OPERATING MANUAL

IMPORTANT INSTRUCTIONS -OPERATING MANUALREAD AND SAVE THESE INSTRUCTIONSREAD CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE

Page 2 - CUSTOMER SERVICE:

WIRINGCAUTION: ALL ELECTRICAL CONNECTIONS MUST BE MADE IN ACCORDANCE WITH LOCAL CODES, ORDINANCES, OR NATIONAL ELECTRICAL CODE. IF YOU ARE UNFAMILIAR

Page 3 - MODE D’EMPLOI

INSTRUCTIONS IMPORTANTES – MODE D’EMPLOILIRE ET CONSERVER CES INSTRUCTIONSLIRE SOIGNEUSEMENT AVANT DE TENTER D’ASSEMBLER, INSTALLER, OPÉRER OU DE RÉPA

Page 4 - SERVICE À LA CLIENTÈLE :

CÂBLAGEAVERTISSEMENT: TOUTES LES CONNEXIONS DOIVENT ÊTRE FAITES EN CONFORMITÉ AVEC LES CODES ÉLECTRIQUES LOCAUX OU NATIONAUX. SI VOUS N’ÊTES PAS FAMIL

Comments to this Manuals

No comments